5L Beer Line Cleaning Bottle with Sankey Type S Cap & Tube
£54.00
Beer Line Cleaning Bottle (Pressurised Unit)
The Beer Line Cleaning Bottle offers a practical way to clean and flush beer lines using your existing dispense setup. Available in different bottle sizes and cap options to suit a range of keg couplers. When choosing your bottle, please ensure you select the correct cap to match your keg coupler, with example cap types shown in the images above.
Key Features
Designed for Line Cleaning: A simple way to flush and soak beer lines using your chosen cleaning solution.
Different Bottle Sizes Available: Smaller bottles suit one or two lines, while larger options are better for multi-line setups.
Coupler-Specific Cap Options: Select the correct cap to match your keg coupler.
Works with Your Gas Setup: Pressurises through your existing regulator to push cleaning solution through the line.
How to Clean Your Lines Using the Beer Line Cleaning Bottle
Always wear the appropriate PPE and follow the instructions provided with your chosen cleaning solution.
Fill the bottle with water and cleaning solution, following the dilution ratio on the cleaner packaging, then refit the cap and tube.
Disconnect the keg coupler from the keg and attach it to the cleaning bottle, keeping the gas regulator connected so the bottle can pressurise.
Open the beer tap with a bucket underneath until cleaning solution starts to flow, then close the tap and leave the solution in the line for the recommended soak time.
Reopen the tap and pull the solution through into the bucket.
Once empty, disconnect the coupler, release the pressure, and rinse the bottle thoroughly.
Refill the bottle with clean water, reconnect it, and flush the line again, running through at least 10 pints of fresh water to remove any remaining cleaner.
Reattach the coupler to the keg and pull through any remaining water before serving.
For best results, beer taps, tap nozzles, and the keg coupler should also be cleaned regularly as part of routine maintenance.
